Ifoperstatus - Paradyne BitStorm 4800 User Manual

ifOperStatus

The ifOperStatus is the current operational state of the interface.
T
T T
T
T
T T
T
T
Table C-17. ifOperStatus
Location Interface
External Console Port
External Modem Port
External Ethernet Management Ports
External Ethernet Downlink Ports
External Ethernet Uplink Ports
External Ethernet/PPP Layer 2 Uplink Port
External PPP Uplink HDLC Interface
External PPP Uplink PPP Interface
Internal PPP Uplink Ethernet Interface
Internal Layer 2 Switch PPP Uplink Processor
Ethernet Interface
External ADSL Ports
External ATM Interfaces
External Port Processor Ethernet Interfaces
Internal Port Processor L2 Switch Ethernet Interfaces
Internal L2 Switch Port Processor Ethernet Interfaces
Internal Management Processor L2 Switch Ethernet
Interface
Internal L2 Switch Management Processor Ethernet
Interface
4800-A2-GB20-10
up(1) – Ready to pass packets
down(2) – ifAdminStatus is down(2)
testing(3) – The interface is in a test state and no packets can be passed
unknown(4) – Status can not be determined
dormant(5) – The interface is awaiting some external action
notPresent(6) – Some component is missing
lowerLayerDown(7) – Down due to the state of a lower-layer interface
July 2002
Value
The port is always up(1)
The port is always up(1)
Any value except down(2)
Any value supported by the syntax
Any value supported by the syntax
Any value except down(2)
Any value except down(2)
Any value except down(2)
Any value except down(2)
Any value except down(2)
Any value supported by the syntax
Any value supported by the syntax
Any value except down(2)
Any value except down(2)
Any value except down(2)
Any value except down(2)
Any value except down(2)
C. MIB Support
C-21