Pdn-Inet-Config-Mib; Pdninetipaddresstable Group - Paradyne BitStorm 4800 User Manual

C. MIB Support

PDN-INET-CONFIG-MIB

The PDN-INET-CONFIG-MIB is used to configure the IP address of an interface.
Table C-76. PDN-INET-MIB Objects
Object
pdnInetTelnetServerPort
pdnInetFtpServerControlPort
pdnInetFtpServerDataPort
pdnInetIpAddressTableMaxIp-
Subnets
pdnInetIpAddressTable-
CurrentIpSubnets
pdnInetIpAddressTable

pdnInetIpAddressTable Group

The pdnInetIpAddressTable comprises the following objects:
Table C-77. pdnInetIpAddressTable
Object
pdnInetIpAddress
pdnInetIpSubnetMask
pdnInetIpAddressType
pdnInetIpRowStatus
pdnInetIpGateway
C-58
OID Syntax
{ pdnInetMIBObjects 1 } INTEGER
{ pdnInetMIBObjects 2 } INTEGER
{ pdnInetMIBObjects 3 } INTEGER
{ pdnInetMIBObjects 4 } Integer32
{ pdnInetMIBObjects 5 } Integer32
{ pdnInetMIBObjects 6 } SEQUENCE OF
pdnInetIpAddress-
TableEntry
OID Syntax
{ pdnInetIpAddress- IpAddress
TableEntry 1 }
{ pdnInetIpAddress- IpAddress
TableEntry 2 }
{ pdnInetIpAddress- INTEGER
TableEntry 3 }
{ pdnInetIpAddress- RowStatus
TableEntry 4 }
{ pdnInetIpAddress- IpAddress
TableEntry 5 }
July 2002
Access Status Supported
read-write current No
read-write current No
read-write current No
read-only current No
read-only current No
not- current Yes
accessible
Access Status Supported
not- current Yes
accessible
read-create current Yes
read-create current Yes
read-create current Yes
read-create current Yes
4800-A2-GB20-10