Configure Syslog - Paradyne BitStorm 4800 User Manual

A. CLI Command Descriptions

Configure Syslog

The configure syslog command limits the messages written to the system log
file.
Table A-16. Configure Syslog Command
A-40
configure syslog rate-limiting {disabled | enabled}
Minimum Access Level: Administrator
The configure syslog rate-limiting command determines whether duplicate messages
are written to the system log.
disabled – All messages (satisfying the syslog threshold setting) are written to the system
log. This is the default.
enabled – Duplicate messages are written to the system log only if they are received
more than five minutes apart.
Example:
IAC#configure syslog rate-limiting disabled
configure syslog threshold
{emergency | alert | information | debug}
Minimum Access Level: Administrator
The configure syslog threshold command specifies the levels of messages that are
written to the system log.
emergency – Only emergency messages are written to the system log.
alert – Emergency and alert messages are written to the system log. This is the default.
information – Emergency, alert, and informational messages are written to the system
log.
debug – Emergency, alert, informational, and debugging messages are written to the
system log.
Example:
IAC#configure syslog threshold information
July 2002 4800-A2-GB20-10