Configure Uplink-Tag - Paradyne BitStorm 4800 User Manual

Configure Uplink-Tag

The configure uplink-tag commands assign a VLAN tag to every DSL port. The
range of numbers is determined by a base number and an index number:
Table A-20. VLAN Tag Ranges
The default base value is 16 and the default index value is 1, so the default VLAN
tags for DSL ports 1–48 of a unit are 16–63, respectively.
Table A-21. Configure Uplink-Tag Command
4800-A2-GB20-10
Base Index 1
16 16 – 63
512 512 – 559
1024
1024 –1071 1072 – 1119
1536 1536 –1583 1584 – 1631
2048 2048 – 2095 2096 – 2143
2560 2560 – 2607 2608 – 2655
3072 3072 – 3119 3120 – 3167
3584 3584 – 3631 3632 – 3679
configure uplink-tag base { base }
Minimum Access Level: Administrator
The configure uplink-tag base command determines the base value to be used for
setting VLAN tags for the DSL ports.
base – Specifies the base value used in setting the range of VLAN tags. Valid values are
16, 512, 1024, 1536, 2048, 2560, 3072, and 3584. The default is 16. See
VLAN Tag Ranges, to see the effect of the base on VLAN tag ranges.
Example:
IAC#configure uplink-tag base 1024
configure uplink-tag index { index }
Minimum Access Level: Administrator
The configure uplink-tag index command determines the index value to be used for
setting VLAN tags for the DSL ports.
index – Specifies the index value used in setting the range of VLAN tags. Valid values are
1–5. The default is 1. See Table A-20, VLAN Tag
VLAN tag ranges.
Example:
IAC#configure uplink-tag index 2
July 2002
Index 2 Index 3
64 – 111 112 – 159
560 – 607 608 – 655
1120 – 1167
1632 – 1679
2144 – 2191
2656 – 2703
3168 – 3215
3680 – 3727
Ranges, to see the effect of the index on
A. CLI Command Descriptions
Index 4 Index 5
160 – 207 208 – 255
656 – 703 704 – 751
1168 – 1215 1216 – 1263
1680 – 1727 1728 – 1775
2192 – 2239 2240 – 2287
2704 – 2751 2752 – 2799
3216 – 3263 3264 – 3311
3728 – 3775 3776 – 3823
Table A-20,
A-45