T Configure - Paradyne BitStorm 4800 User Manual

A. CLI Command Descriptions
Configure
The configure command causes the CLI to enter configuration mode, from which
you can specify what element of the system you would like to configure.
Table A-3. Configure Command
A-4
configure
Minimum Access Level: Administrator
The configure command causes the CLI to enter configuration mode. Once the
IAC(configure)# prompt is displayed, you can enter one of the configuration
subcommands.
Example:
IAC#configure
IAC(configure)#interface
IAC(configure-interface)#bridge
IAC(configure-interface-bridge)#mode switch
IAC(configure-interface-bridge)#!save
IAC(configure-interface-bridge)#
July 2002 4800-A2-GB20-10