T Back - Paradyne BitStorm 4800 User Manual

A. CLI Command Descriptions
Back
The back command logically positions the CLI in the command structure.
Table A-1. Back Command
A-2
back
Minimum Access Level: User
The back command positions access up one level in the command tree. For example, if
DSL interface 1/1 is being configured, the following prompt is displayed:
IAC(configure-interface-dsl-1/1)#
The back command returns the display to the iac-configure-interface-dsl#
prompt .
Example:
IAC(configure-interface-dsl-1/1)#back
IAC(configure-interface-dsl)#back
IAC(configure-interface)#_
July 2002 4800-A2-GB20-10