Appendix A: Technical Specifications - Owon PDS5022S User Manual

User's Manual of OWON Colour Digital Storage Oscilloscope

Appendix A: Technical Specifications

Unless otherwise specified, the technical specifications applied are applicable to the
probe with the attenuation switch setting 10X and the PDS series digital oscilloscope.
Only if the oscilloscope fulfill the following two conditions at first, can these
specification standards be reached.
This instrument should run for more than 30 minutes continuously under the
specified operating temperature.
If the change range of the operating temperature is up to or exceeds 5℃, open the
system function menu and execute the "Self-calibration" procedure.
All specification standards can be fulfilled, except one(s) marked with the word
"Typical".
Characteristic
Bandwidth
Channel
Acquisition：
Input：
Horizontal
System：
Mode
Sample rate
(real time)
Input coupling
Input impedance
Probe attenuation
factor
Max. input voltage
Sampling rate
Interpolation
Instruction
25MHz ---- PDS5022S
●
40MHz ---- PDS6042S
●
60MHz ---- PDS6062S, PDS6062T,
●
100MHz ---- PDS7102T
●
2 + 1 (External)
Normal, Peak detect, Averaging
100MS/s ---- PDS5022S
●
250MS/s
●
---PDS6042S, PDS6062S, PDS6062T
500MS/s ---- PDS7062T, PDS7102T
●
DC, AC , Ground
Ω±2% ， in
● 1M
---PDS5022S, PDS6042S,PDS6062S,PDS6062T
1MΩ±2%，in parallel with 15pF±5pF
●
1X，10X，100X，1000X
300V (PK-PK) （DC + AC PK-PK）
10S/s～100MS/s---- PDS5022S
●
10S/s～250MS/s
●
---- PDS6042S, PDS6062S, PDS6062T
1S/s～500MS/s ---- PDS7062T, PDS7102T
●
（sin x）/x
84
PDS7062T
parallel with20pF±5pF
--- PDS7062T,PDS7102T