Save And Recall The Wave Form - Owon PDS5022S User Manual

User's Manual of OWON Colour Digital Storage Oscilloscope
The description of the Wave Form Save Menu is shown as the following table:
Function Menu
Source
WAVE
Save
CHA

Save and recall the wave form

The PDS series oscilloscope can store four wave forms, which can be displayed with
the current wave form at the same time. The stored wave form called out can not be
adjusted.
In order to save the wave form of the channel CH1 into the address A, the operation
steps should be followed:
1. Press the F1 menu selection button and choose CH1 for Source.
2. Press the F2 menu selection button and choose A for Wave.
3. Press the F3 menu selection button and save the wave form.
4. Press the F4 menu selection button and choose ON for CHA. The stored wave
form A will be displayed in the screen. The voltage level and time base level will
also be shown at the upper left corner of the display area at the same time (see
Fig.53).
Setting Description
CH1
CH2 Choose the wave form to be saved.
MATH
A , B Choose the address in or from which the
C , D waveform is saved or can be get access to.
Save the wave form of the source in the
selected address.
OFF Switch on or off the display of the stored
ON waveform.
59