Advanced User's Guidebook - Owon PDS5022S User Manual

User's Manual of OWON Colour Digital Storage Oscilloscope

Advanced User's Guidebook

Up till now, you have already been familiar with the initial operations of
"VERTICAL CONTROLS", "HORIZONTAL CONTROLS" and "TRIGGER
CONTROLS", and the functions of the function areas, buttons and knobs in the front
panel of the PDS series oscilloscope. Based the introduction of the previous Chapter,
the user should have an intimate knowledge of the determination of the change of the
oscilloscope setting through observing the status bar. If you have not been familiar
with the above-mentioned operations and methods yet, we advise you to read the
section of "Chapter One Junior Users' Guidebook".
This chapter will deal with the following topics mainly:
To set the Vertical System
To set the Horizontal System
To set the Trigger System
To perform the Sampling Setup
To set the Display System
To Save and Recall a Wave Form
To perform the Auxiliary System Function Setting
To perform the Automatic Measurement
To perform the Cursor Measurement
To use Autoscale function
To use Executive Buttons
It is recommended that you read this chapter carefully to get acquainted the various
measurement functions and other operation methods of the PDS series oscilloscope.
23