User's Manual of OWON Colour Digital Storage Oscilloscope
channel CH1:
1. Press CURSOR and recall the Curs Meas menu.
2. Press the F1 menu selection button to choose Voltage for Type, with two purple
dotted lines displayed along the horizontal direction of the screen, which
indicating CURSOR1 and CURSOR2.
3. Press the F2 menu selection button and choose CH1 for Source.
4. Adjust the positions of CURSOR1 and CURSOR2 according to the measured
wave form, with the absolute value of the voltage amplitude difference between
Cursor 1 and Cursor 2 displayed in the increment window. The current position
of Cursor1 is displayed in the Cursor1 window and that of Cursor2 is displayed in
the Cursor2 window (see Fig.60).
Fig.60 Wave Form of Voltage Cursor Measurement
Carry out the following operation steps for the time cursor measurement of the
channel CH1:
1. Press "CURSOR" and recall the CURS MEAS menu.
2. Press the F1 menu selection button and choose Time for Type, with two purple
dotted lines displayed along the vertical direction of the screen, which indicating
Cursor 1 and Cursor 2.
3. Press the F2 menu selection button and choose CH1 for Source.
4. Adjust the positions of CURSOR1 and CURSOR2 according to the measured
wave form, with the cycle and frequency of Cursor1 and Cursor 2 displayed in
the increment window. The current position of Cursor1 is displayed in the
67