To Use Executive Buttons - Owon PDS5022S User Manual

User's Manual of OWON Colour Digital Storage Oscilloscope

To use Executive Buttons

The executive buttons include AUTOSET, RUN/STOP.
AUTOSET
This button is used for the automatic setting of all control values of the instrument to
generate the wave form suitable for observation. Press the AUTOSET button and the
oscilloscope will perform the fast automatic measurement of the signal.
The function items of AUTOSET are shown as the following table:
Function Items
Acquisition Mode
Vertical Coupling
Vertical Scale
Bandwidth
Horizontal Level
Horizontal Sale
Trigger Type
Trigger Source
Trigger Coupling
Trigger Slope
Trigger Level
Trigger Mode
Display Format
RUN/STOP: Enable or disable the waveform sampling.
Notice: Under the Stop state, the vertical division and the horizontal time base of the
wave form can be adjusted within a certain range, in other words, the signal
can be expanded in the horizontal or vertical direction.
When the horizontal time base equal to or is less than 50ms, the horizontal
time base can be expanded for 4 divisions downwards.
Setting
Current
DC
Adjust to the proper division.
Full
Middle
Adjust to the proper division
Current
Show the minimum number of channels.
Current
Current
Mid-point Setting
Auto
YT
71