To Perform The Automatic Measurement - Owon PDS5022S User Manual

User's Manual of OWON Colour Digital Storage Oscilloscope
The "SYS STAT" menu is described as the following table:
Function Menu
Horizontal
Vertical
Trigger
Misc
After entering into the SYS STAT menu, choose the corresponding function, with the
corresponding parameters shown in the screen. If press the F1 menu selection button
and choose the function item "Horizontal", the Horizontal System State will be
displayed in the screen. Press any other function button and exit from the SYS STAT
menu (see Fig.56).

To perform the Automatic Measurement

With the Measure button pressed down, an automatic measurement can be performed.
There are 20 types of measurements and 4 measurement results can be displayed
simultaneously.
The 20 types automatic measurements include frequency, cycle, average value,
peak-to-peak value , root mean square value, Vmax, Vmin, Vtop, Vbase, Vamp,
Overshoot, Preshoot, RiseTime, Fall Time, +Width, -Width, +Duty, -Duty,
and DelayA B .
DelayA B
Setting Description
Show the horizontal parameter of the channel.
Show the vertical parameter of the channel.
Show the parameters of the trigger system.
Show the serial number and edition number.
Fig.56 Horizontal System State
62