User's Manual of OWON Colour Digital Storage Oscilloscope
Cursor1 window and that of Cursor2 is displayed in the Cursor2 window (see
Fig.61).
To use Autoscale
The function is applied to follow-up signals automatically even if the signals change at
any time. Autoscale enables the instrument to set up trigger mode, voltage division and
time scale automatically according to the type, amplitude and frequency of the signals.
The menu is as follows:
Function Menu
Autoscale
Mode
Fig.61 Wave Form of Cursor Measurement
Setting
Instruction
OFF
Turn off
ON
Turn on
Vertical
Follow-up and adjust vertical scale without
changing horizontal setting
Horizontal
Follow-up and adjust horizontal scale without
changing vertical setting
HORI—VERT
Follow-up and adjust the vertical and
horizontal settings.
Autoscale
Autoscale
68