User's Manual of OWON Colour Digital Storage Oscilloscope
The description of the cursor measurement menu is shown as the following table:
Function Menu
Type
Source
Delta
Cursor 1
Cursor 2
Cursor Measurement
When carrying out the cursor measurement, the position of Cursor 1 can be adjusted
with the CURSOR1 (VERTICAL POSITION) knob of Channel 1, and that of
Cursor 2 can be adjusted with the CURSOR2 (VERTICAL POSITION) knob of
Channel 2.
Perform the following operation steps for the voltage cursor measurement of the
Fig.59 CURS MEAS Menu
Setting
Description
OFF
Switch off the cursor measurement.
Voltage
Display the voltage measurement cursor and
menu.
Time
Show time measures the cursor and menu.
Choose the channel generating the wave form to
CH1, CH2
which the cursor measurement will be applied.
Read the difference between cursors.
Read the position of Cursor 1 (the Time is read
with reference to the horizontal trigger position
and the Voltage is to the ground point).
Read the position of Cursor 1 (the Time is read
with reference to the horizontal trigger position
and the Voltage is to the ground point).
66