Anchor View - Psion Teklogix 7535 User Manual

To choose 'Lower' and 'Upper character sets:
• Position the cursor on the 'Lower' or 'Upper' parameter, and press the
<RIGHT> or <LEFT> arrow key to display the character set options.
• Press <F4> to save your selection to memory.
Important: When a character sent from the host cannot be displayed, a
rectangular box is used as a substitute.

6.17.1.8 Anchor View

When enabled (set to "Y"), this parameter locks the display at a defined location on
the screen, preventing it from shifting when the cursor is moved. The "x origin" and
"y origin" coordinates specify where the screen origin, the upper left corner of the
screen, will be fixed.
x origin and y origin
The "x origin" parameter is used to specify the column to which the upper left
corner of the screen will be anchored. The "y origin" parameter is used to specify
the row coordinate to which the screen will be anchored.
Anchor
05
x origin
y origin
Chapter 6: Tekterm Application
Range
1 1..24
1 1..80
Teklogix 7535 Hand-Held Computer User Manual

Anchor View

175