Polycom SoundPoint IP 200W User Manual page 43

When the entire update has been
successfully completed, the display reads
"Upgraded to <version number>".
While the update is in progress you cannot
make calls on the SoundPoint IP 200W.
If you have more than one handset
registered with the gateway, all handsets
will be updated when you press the OK
key, but not necessarily at the same time.
To check for firmware updates:
1. In the main menu, choose Settings,
and then press the OK key.
2. Choose System settings, press the
OK key, and then choose Firmware
update.
3. Use the arrow keys to navigate to the
Advanced tab.
4. Choose a firmware version from
the list. (All previous versions are
displayed, as well as the newest
version.) Press the OK key, and then
press the Yes soft key when prompted
to update the system.
To revert to an older firmware version:
See "To check for firmware
updates", above.
To restore configuration settings to
default settings:
• Reset the gateway.
It is recommended that you do
not reset the gateway during the
firmware update process.
40