Placing An Emergency Call; Answering A Call - Polycom SoundPoint IP 200W User Manual

Placing a Call Using Speed Dial
1. On the dial pad, press the speed
dial number associated with the
desired contact.
For example, if the desired
contact is number four on the
speed dial list, press
2. Press .

Placing an Emergency Call

• Enter the emergency number for
your area, and then press
When Placing an emergency call, always press
your emergency calls are routed through an IP network or an analog
telephone line. For more information, see
page 13 of this User guide.
Emergency calls cannot be placed under the following circumstances:
• Firmware update is in progress
• Handset batteries are drained
• Power failure
• Handset is out of range of the gateway

Answering a Call

• Pick up the handset, and then
press .
The SoundPoint IP 200W can be configured
so that a call is answered when the handset
is lifted from the charger, or when any key is
pressed. For more details, see
and
Any Key Answer
User Guide.
.
.
Auto Answer
on page 31 of this
regardless of whether
Emergency Line Settings
17
on