Polycom SoundPoint IP 200W User Manual page 34

Auto Answer
Auto answer allows you to answer
incoming calls automatically when you
pick up the handset from the charger.
To enable auto answer:
1. In the main menu, choose Settings,
and then press the OK key.
2. Choose Telephony settings, press
the OK key, and then choose
Answer mode. Press the OK key.
3. Auto answer, press the OK key,
and then select Enabled. Press
.
"Any Key" Answer
"Any key" answer allows you to answer
incoming calls by pressing any key on
the dial pad.
To enable "any key" answer:
1. In the main menu, choose Settings
and then press the OK key
2. Choose Telephony settings, press
the OK key, and then choose
Answer mode. Press the OK key.
3. Choose Any key answer, press the
OK key, and then select Enabled.
Press .Setting Dial Mode for
Analog Calls
If your primary telephone line is an
analog telephone line, you may choose
either Pulse or Tone dialing.
To set Landline dial mode:
1. In the main menu, choose Settings,
and then press the OK key.
2. Choose Telephony settings, press
the OK key, and then choose
Landline dial mode. Press the OK
key.
3. Select either Pulse or Tone, press
the OK key, and then press the Yes
soft key when prompted to save.
31