Polycom SoundPoint IP 200W User Manual page 27

To reset the phone:
1. From the idle screen, press the
OK key, and then select the
Settings menu.
2. Enter 4-2-6-8-5 on the keypad. A
service menu appears.
4. Select Handset.
You may be unable to register a handset with the gateway if the gateway
is configured to accept only certain handset ID's (IPEI). For additional
information on handset restrictions, refer to the
Configuration Guide for the SoundPoint IP 200W
Deregistering Handsets with
the Gateway
If the handset you want to register is
already registered with another gate-
way, you need to deregister the handset
from its current gateway before you
may register it with a new gateway.
To deregister a handset with the
gateway:
1. In the main menu, choose Set-
tings, and then press the OK key.
2. Choose System settings, press the
OK key, enter the PIN code, and
then choose Handset settings.
Press the OK key.
3. Choose Deregister handset, press
the OK key, and then press the
Yes soft key when prompted to
deregister the handset.
Viewing All Handsets Regis-
tered with the Gateway
1. In the main menu, choose Set-
tings, and then press the OK key.
2. Choose System settings, press the
OK key, enter the PIN code, and
then choose Handset settings.
Press the OK key.
3. Choose Handsets, and a list of all
handsets is displayed.
5. Select Default EEPROM. The
phone will reboot and clear its
EEPROM.
6. Register the handset by placing it
in the charging cradle.
Provisioning and
24
.