Configuring.the.soundpoint.ip.200W - Polycom SoundPoint IP 200W User Manual

SoundPoint.IP.200W.Setup
Configuring the SoundPoint IP 200W
You can configure your SoundPoint IP
200W using the handset. You will need
the account information that you received
To configure the SoundPoint IP 200W us-
ing the handset:
1. In Idle mode, press the OK key,
choose Settings, and then press the
OK key.
2. Choose VoIP settings, and then press
the OK key.
3. When prompted for a PIN code,
enter the default PIN code 456, and
then press the OK key.
To specify the Domain and the SIP
proxy:
1. Choose Server, press the OK key,
and then choose Domain.
2. Press the OK key, and then enter
the domain name. Press the OK
key.
If you have more than one VoIP account,
you then need to specify account settings
for each account.
To specify account settings for each VoIP
account:
1. Choose Accounts, press the OK
key, select an account, and then
press the OK key.
2. Based on the account information
you received from your Internet
Telephony Service Provider, scroll
to each of the following parameters,
press the OK key, and then key in
the relevant information:
• Display name (optional): Your
caller ID
from your Internet Telephony Service
Provider to complete the configuration of
your SoundPoint IP 200W.
3. Choose SIP proxy, press the OK key,
and then key in domain name or IP
address of the SIP proxy, if it is dif-
ferent from the Domain.
• Nickname: Name of the account
used in Call Groups and VoIP line
settings
• SIP User name: Usually, the
phone number you received from
your service provider
• Authentication Name: Usually,
the same as User name
• Password: The default password
given by your service provider
9