Voip Settings - Polycom SoundPoint IP 200W User Manual

Specifying an Emergency Line
• See
Emergency Line Settings
on page 13 of this User Guide.
Specifying VoIP Line
The VoIP line setting determines which
VoIP account is used for outbound VoIP
calls.
To specify a VoIP for outbound calls:
1. In the main menu, choose Settings,
and then press the OK key.
2. Choose Telephony settings, press
the OK key, and then choose VoIP
line. Press the OK key.
3. Select the VoIP account you want
to use for outbound VoIP calls. All
nicknames for the VoIP accounts
you subscribe to are listed. If you
only have one account, only one
nickname is listed.

VoIP Settings

VoIP settings are used to configure your
SoundPoint IP 200W. Typically, you will
configure your VoIP settings by using the
handset.
To access the VoIP settings:
1. In the main menu, choose Settings,
and then press the OK key.
2. Choose VoIP settings, press the OK
key, and then enter your PIN code
(the default PIN code is 456). Press
the OK key.
The following VoIP settings are
displayed:
• Domain - Domain name.
• SIP Proxy - Typically, the same as
Domain.
Specifying Primary Telephone Line
• See
Specifying a Primary
Line for Outbound Calls
page 20 of this User Guide.
The handset PIN code is
required for access to the
VoIP settings menu.
For more information on
configuring your VoIP
settings, see
the SoundPoint IP
200W
User Guide.
32
Configuring
on page 9 of this
on