System Settings - Polycom SoundPoint IP 200W User Manual

System Settings

Time and Date Settings
By default, date and time are
automatically synchronized with a
time server on the Internet to ensure
that the time and date displayed on the
SoundPoint IP 200W is always correct.
However, you can disable automatic time
setting.
To disable automatic time setting:
1. In the main menu, choose Settings,
and then press the OK key.
2. Choose System settings, press the
OK key, and then choose Time and
date. Press the OK key.
3. Choose Auto set time, press the OK
key, and then select Auto set time
off. Press the OK key.
4. Press the Reset button on the rear of
the gateway for the changes to take
effect.
To change the time format:
1. In the main menu, choose Settings,
and then press the OK key.
2. Choose System settings, press the
OK key, and then choose Time and
date. Press the OK key.
3. Choose Time format, press the OK
key, and then select either AM/PM
or 24 hour. Press the OK key.
If you disable automatic time setting, you
may set the time manually.
To set time manually:
1. In the main menu, choose Settings
and then press the OK key.
2. Choose System settings, press the
OK key, and then choose Time and
date. Press the OK key.
3. Choose Set time, press the OK key,
and then use the dial pad to enter
the correct time. Press the OK key.
If you disable automatic time and date
setting, you may set the date manually.
The handset PIN code is
required for access to the
System settings menu.
36