Using Call Display; Using Call Hold/Call Waiting; Using Call Forwarding - Polycom SoundPoint IP 200W User Manual

Using Call Display

When you receive an incoming call,
the SoundPoint IP 200W displays the
caller's name and telephone number
(Caller ID).
If the caller is in your contact directory,
the SoundPoint IP 200W will display
the caller's information as it appears
in the contact directory, rather than the
caller's default Caller ID information.

Using Call Hold/Call Waiting

Placing a Call on Hold
• During a call, press the Hold soft key.
Retrieving a Call from Hold
• To resume the call, press the Retrieve
soft key.
Call waiting alerts you to an incoming call
while you are on another call.
Answering an Incoming Internal Call
1. Press . The current call is auto-
matically put on hold.
2. Press the Options soft key, and then
choose Swap calls to answer the incom-
ing call.
3. Press
For more information on internal calls, see
Placing Internal Calls
User Guide.

Using Call Forwarding

You use call forwarding to specify a number
to which your calls are forwarded, when
you are not able to answer your calls. To be
able to use call forwarding, you will must
configure your call forwarding settings. For
more information on call forwarding, see
Call Forwarding
Guide.
to end the call.
on page 25 of this
on page 29 of this User
If the caller has blocked outbound
Caller ID display, no contact
information will be displayed.
For incoming analog calls, your
telephony provider may require
that you subscribe to a Caller ID
service. Contact your telephony
provider for more details.
18