Changing The Pin Code; Configuring On-Screen Information Services - Polycom SoundPoint IP 200W User Manual

3. After each entry, press the OK
key, and then the Yes soft key when
prompted to save changes.

Changing the PIN Code

Change the PIN code after your first login
to prevent unauthorized access to your
VoIP settings.
To change the PIN code:
1. In Idle mode, press the OK key,
choose Settings, and then press the
OK key.
2. Choose VoIP settings, and then
press the OK key.
3. When prompted for a PIN code,
enter the default PIN code 456, and
then press the OK key.
The handset PIN code and the
online configuration password are
independent of each other. Changing
the handset PIN code will not affect
the online configuration password.

Configuring On-screen Information Services

On-screen information services provide in-
stant access on your SoundPoint IP 200W
to Internet information such as news and
weather reports.
Information Services are not
available with the default setting.
To take full advantage of the on-screen
information services features, you need to
configure the settings of your on-screen
information services online.
For more information, refer to SoundPoint
IP 200W - Information Services
Developer's Guide, available at
www.polycom.com
4. Press the Reset button on the rear
of the gateway when you have en-
tered all the necessary information.
4. Choose Change PIN code and then
press the OK key.
5. Enter a new three- or four-digit PIN
code, and then press the OK key.
6. Press the Yes soft key when
prompted to save the PIN code.
Once you have configured the on-screen
information services, you may activate the
on-screen information services features in
the Info Services menu on the handset.
For more information, see
on page 42 of this User Guide.
Menu
10
Info Services