Ring Tone - Polycom SoundPoint IP 200W User Manual

You may specify a sound that you will
hear when you press a key on the handset.
To change dial pad sound:
1. In the main menu, choose Settings,
and then press the OK key.
2. Choose Audio settings, and then
choose Keypad sound.
3. Choose a sound from the list and
then press the OK key. Choose
disabled if you do not want a dial
pad sound.
The SoundPoint IP 200W utilizes
advisory tones alert you to the following
events:
Advisory Tone
Battery alert

Ring tone

Confirmation
By default all advisory tones are
activated.
To turn advisory tones on or off:
1. In the main menu, choose Settings
and then press the OK key.
2. Choose Audio Settings, and then
press the OK key.
3. Advisory tones, press the OK key,
and then select the type of tone you
want to disable or enable by pressing
the OK key. Press
You may activate silent mode to disable
all ringer melodies and confirmation
sounds.
To activate Silent Mode:
1. In the main menu, choose Settings,
and then press the OK key.
2. Choose Silence, press the OK key,
and then choose Silent on. Press the
OK key.
Description
Batteries need to be recharged or replaced.
The Handset is out of range of the gateway.
Using the dial pad, you have saved or deleted an entry, or made a
selection.
.
28