Network Settings - Polycom SoundPoint IP 200W User Manual

Information Push Settings
You specify when you want the
SoundPoint IP 200W to display on-screen
information services.
To set auto show on-screen information
services:
1. In the main menu, choose Settings,
and then press the OK key.
2. Choose Information push, and then
press the OK key.
3. Select the relevant option, and then
press the OK key. You may choose
one of the following options:
Accounts Setting
Display name
Nickname
SIP User name
Authentication
Name
SIP Password

Network Settings

Use Network settings to view information
about your SoundPoint IP 200W's
Internet connection, and to specify
whether to use static or dynamic IP mode.
The following options are available in
the Network settings menu:
• NAT Provisioning
• DHCP
• Virtual LAN
• IP Mode
NAT Provisioning
This option allows you to use STUN or
RPORT when the SoundPoint IP 200W
is behind a NAT (Network Address
Translation) router.
Description
Your caller ID display name.
Name of the account.
Usually, the phone number you received from your Internet
Telephony Service Provider.
Usually, the same as SIP User name.
Default password given by your Internet Telephony Service
Provider.
33
Information Push services
are not available with the
default setting.
The handset PIN code is
required for access to the
Network settings menu.