Using.the.task.menus; Intercom Menu - Polycom SoundPoint IP 200W User Manual

Using.the.Task.Menus

Intercom Menu

The Intercom Menu allows you to view
and manage all handsets which are
registered with your SoundPoint IP 200W
gateway.
You may register up to eight handsets
with the same gateway, and you may
have up to eight different VoIP accounts,
provided they are from the same Internet
Telephony Service Provider.
Registering Additional
Handsets with the Gateway
If you have more than one handset, you
may place intercom calls, and transfer
calls to other handsets. You may
answer incoming calls on any of the
registered handsets.
To register a handset with the
gateway:
1. Press the Reset button on the
rear of the gateway to enable
registration mode.
2. Place the handset in the charger.
The left status indicator in the up-
per left corner of the display will
turn yellow, indicating that you
have successfully registered the
handset.
OR
1. Press the Reset button on the
rear of the gateway to enable
registration mode.
2. In the main menu, choose
Settings, and then press the OK
key.
3. Choose System settings, press
the OK key, and then choose
Handset settings. Press the OK
key.
However, you may only have four active
calls at a time: three IP calls and one
analog call.
If you use Call Groups, you should only
include up to six handsets in a Call Group,
because only six handsets at a time can re-
ceive incoming calls. (For more informa-
tion on Call Groups, see
on page 12 of this User Guide.)
Groups
4. Choose Register handset, press
the OK key, and then press the
Yes soft key when prompted to
register handset.
If you have difficulty resistering a
handset to the gateway, please see
To reset the phone on the next
page of this User Guide.
23
Selecting Call