Firmware Updates - Polycom SoundPoint IP 200W User Manual

2. Choose System settings, press the
OK key, and then choose Handset
settings. Press the OK key.
3. Choose Display Contrast, press the
OK key, and then press the Restore
soft key.
OR
• In the main menu, press 555, and
then press the Yes soft key when
prompted to restore the contrast.

Firmware Updates

When new firmware is available, an alert
will appear on the display which reads,
"New firmware available".
To update firmware:
1. Press the OK key. The Firmware
update menu appears.
2. Press the View soft key. The version
number of the software will be
displayed, as well as the date and
time of its release.
(If you do not wish to update the firmware
at this time, press
Firmware can be updated at a later time;
see "To check for firmware updates" on
the next page of this User Guide.
If you wish to continue updating the
firmware, continue to the next step.)
3. Choose the update listed on the
Simple tab, press the OK key, and
then press the Yes soft key when
prompted to update the system.
The update time varies depending on the
size of the update and the speed of your
Internet connection. During the update
process the following steps are listed in
the display:
Getting gateway
•
• Updating gateway handset
• Updating handset
When a step has been completed
successfully, a green check mark appears
after the message.
to exit the menu.
39