Table of Contents
Advertisement
Axiovert 200
2.4
Screw in objectives
Remove dust caps (2-7/1) from the respective
openings in the nosepiece.
Remove objectives (2-7/2) from the case and
screw them in the nosepiece (2-7/3), starting
with position 1 (see engraved number), in
increasing order of magnification factors. Make
sure that the objective is correctly and securely
locked.
Make
sure
protection caps on those nosepiece
eyes which are not required.
B 40-080 e 03/01
Screw in objectives
to
use
the
dust
START-UP
Fig. 2-7
Screw in objectives
Carl Zeiss
2-9
- Quick Links:
- Overall View of the Axiovert 200
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Axiovert 200 and is the answer not in the manual?
Questions and answers