Operation; Chapter 3 Operation - Zeiss Axiovert 200 Operating Manual

OPERATION

Axiovert 200 Carl Zeiss
3 OPERATION
The Axiovert 200 microscopes are offered in a manual version and in a version with motorized functions
and components.
In the "Operation" chapter, the manual setting and operation functions are explained first, and the
motorized (coded) functions are then explained separately, where required. However, many operation
functions are entirely identical in both instrument versions.
This manual will not deal with the possibilities of operating the motorized Axiovert 200 M together with
a connected PC.
Equipment of the stands with an LCD display is possible as an option. The LCD display can also be
integrated subsequently, but this must be performed by Zeiss service staff.
The Axiovert 200 microscopes have been designed for use with incubators and micromanipulators. For
information about connection possibilities and operation of these units, please see the relevant separate
manuals.
B 40-080 e 03/01 3-3