Various Mode Settings - Fujitsu PRIMEQUEST 2000 Series Installation Manual

CHAPTER 3 Work before Operating System Installation
3.4 Partition Configuration (Physical Partition)

3.4.5 Various mode settings

Dynamic Reconfiguration, Memory operation mode, and Hyper Threading Mode, etc. of the partition are set. Setting items
are set by MMB Web-UI and UEFI.
For details on the respective settings in MMB, see "[Mode] window" of "1.3.9 [Partition#x] menu" of PRIMEQUEST 2000
series Tool Reference (CA92344-0539)
For details on the respective settings in UEFI, see "3.4 [Device Manager] menu" of PRIMEQUEST 2000 series Tool
Reference (CA92344-0539)
Note
- Confirm the I/O space is allocated in the PCI device of a relevant partition.
- Confirm the I/O space is allocated in the SAS device (SAS card, RAID card, RAID card in DU or RAID card in SB).
If PCI Address Mode is set to PCI Segment Mode, the I/O space cannot be allocated to SAS device on Non
Home SB. The SAS device on Non Home SB does not need the I/O space.
SAS device is displayed as "Device: SAS", and the FC device is displayed as "Device: Fibre". When I/O space is
not allocated, operate [I/O Space Assignment Configuration] menu and remove the allocation of LAN and FC
card.
However, do not remove the allocation of I/O space for the FC card and LAN Card below.
- For legacy boot, also confirm the allocation of the I/O space to the Dual Channel LAN Card (10G BASE).
- For legacy boot, also confirm the allocation of the I/O space to the Qlogic FC Card (8Gbps).,
- For Secure Boot, Web BIOS cannot be used. Please use HII Configuration Utility. For start HII Configuration Utility,
refer to LSI MegaRAID SAS 12G Software. For how to start of HII Configuration Utility, see "Appendix F Starting HII
Configuration Utility".
- For PRIMEQUEST 2400E2/2800E2/2800B2, Web BIOS cannot be used. Please use HII Configuration Utility. For
start HII Configuration Utility, refer to LSI MegaRAID SAS 12G Software. For how to start of HII Configuration Utility,
see "Appendix F Starting HII Configuration Utility".
- If PCI Address Mode is set to PCI Segment Mode, when you set configuration of Hardware RAID to HDD/SSD on
Non Home SB, confirm the PCI ROM Priority in BIOS menu is set to EFI Compatible ROM. Then, start HII
Configuration Utility/Web BIOS by EFI Shell.
- Confirm whether the Boot device used in the relevant partition is recognized in the UEFI. For confirmation, see
"3.3[Boot Manager] menu" of PRIMEQUEST 2000 series Tool Reference (CA92344-0539). Identify the Boot device
by operating the [Boot Manager] menu when the Boot device is not recognized by the UEFI.
- A confirmation dialog box is displayed, when the DIMM configuration mismatches Reserved SB and the partition.
When switched to Reserved SB, warning message containing the reasons for releasing Memory Operation Mode is
shown and confirm whether to continue the settings.
42
CA92344-0536-04