Table of Contents
Advertisement
3
Installation steps, overview
This chapter contains an overview of the steps necessary to install your server.
Links take you to sections where you can find more detailed information about
the respective steps:
Ê First of all, carefully read the safety instructions in
page 35
and following.
Ê Transport the server to the place where you want to set it up.
Ê Unpack the system, check the contents of the package for visible transport
damage and check whether the items delivered correspond to the details on
the delivery note (see
Ê Make sure that you have all necessary manuals (see
overview" on page
Ê Components that have been ordered additionally may be delivered loose
with the server. For mounting refer to the original component documentation.
Ê Mount the server into the rack (see
the rack" on page
Ê Wire the server. To do this, refer to sections
server" on page 53
page
57.
Ê Connect the server to the mains (see
source" on page
Ê Familiarize yourself with the controls and indicators on the front and rear of
the server (see section
RX2520 M1
"Unpacking the server" on page
12); print out the PDF files if required.
51).
and
"Notes on connecting/disconnecting cables" on
55).
"Controls and indicators" on page
Operating Manual
"Important information" on
"Installing/removing the server in/from
"Connecting devices to the
"Connecting the server to the power
50).
"Documentation
59).
33
Advertisement
Table of Contents
