Printer Interface Software - Oce Arizona 200 GT User Manual

Printer Interface Software

Printer Interface Software
Introduction
The printer software is displayed on the LCD monitor. The interface has six main modules
that are accessed by tabs located at the bottom of the display. Click on these tabs to access
the modules. Print Job Control is the default module displayed when the software has
finished loading after the printer is switched on or reset.
The Print Job Control display is divided into functional and status areas. The functional
areas supports all operator input necessary to operate, maintain and service the printer.
The status areas are used to report printer status.
Onscreen Keyboard & Numeric Keypad
A mouse is used as the input device to navigate the menu-based interface. For operations
that require operator input, the mouse is used to select either numeric characters from a
virtual keypad or alphanumeric charaters from a virtual keyboard. These virtual input
screens are displayed on the interface LCD monitor when data entry is required.
Illustration
[51] Virtual Keyboard
60 Chapter 4 - How to Navigate the User Interface