Oce Arizona 200 GT User Manual page 289

How to Clean the Rubber Capstan
Note:
It may be difficult to tell whether or not all the ink has left the surface. Continue to wet
and wipe the capstan surface until the cloth does not show any sign of ink color.
[207] Wipe up remainder of ink
Allow adequate time for capstan to dry.
4.
Note:
If the scrubbing action leaves fibers from the cloth on the surface, wait for the surface
to dry completely, then follow the procedure listed above for Removing Solid Debris.
Result
When the capstan is kept clean and its rubber surface free of blemishes or defects you
will be ensured of accurate media transport and optimal print quality. If its surface is
badly damaged the capstan will need to be replaced.
Chapter 12 - Printer Maintenance 289