Oce Arizona 200 GT User Manual page 232

Arizona Printer Inks
Caution:
Uncured ink is a serious health and safety risk! Avoid skin contact with ink and wear
safety glasses with side shields and Nitrile rubber gloves when handling ink.
Attention:
Do not install inks that are not certified by Océ Display Graphics Systems for use in this
printer, as this may result in poor quality prints, uncured ink in the finished prints and
permanent damage to the ink pumps, filters, ink lines or printheads.
Note:
The UV lamp power settings can be lowered to reduce warping of some media. However,
set the lamp power as high as possible for each media to ensure that the ink cures prop-
erly. This will minimize the risk of skin irritation and sensitization from exposure to
uncured ink. Wear nitrile gloves when you handle printed media if you suspect the ink
is not properly cured.
Illustration
[176] Ink Bay With Bags
232 Chapter 10 - Ink System Management