Oce Arizona 200 GT User Manual page 273

Insert the new ink filter in the metal retainer clips in the upright position (this means
15.
that the white bleed cap is at the bottom). Be careful not to pinch the ink lines.
Final Steps
Check the new filter to make sure there are no ink leaks.
1.
Open any purge valves on the carriage that are still closed.
2.
Use a felt pen or create a label to record the install date.
3.
Replace the ink filter enclosure cover.
4.
Perform routine printhead maintenance before printing.
5.
Replace the ink filters every 12 months or after consumption of 11 bags (22 liters) of ink.
6.
How to Change Ink Filters
Chapter 12 - Printer Maintenance 273