Printer Interface Software - Oce Arizona 6160 XTS User Manual

Printer Interface Software

Printer Interface Software
Introduction
The printer software user interface is displayed on the LCD monitor. The interface has six main
modules that are accessed by tabs located at the bottom of the display. Click on these tabs to
access the modules. Print Job Control is the default module displayed when the software has
finished loading after the printer is switched on or reset.
The Print Job Control display is divided into functional and status areas. The functional areas
supports all operator input necessary to operate, maintain and service the printer. The status
areas are used to report printer status.
Onscreen Keyboard & Numeric Keypad
A mouse is used as the input device to navigate the menu-based interface. For operations that
require operator input, the mouse is used to select either numeric characters from a virtual
keypad or alphanumeric characters from a virtual keyboard. These virtual input screens are
displayed on the interface LCD monitor when data entry is required. In the example below, the
Network name of the printer is about to be changed.
Virtual Keyboard
Operator Interface Module Tabs
Interface Modules
Component
Print Job Control
(Print tab)
Automatic Mainte-
nance
48 Chapter 3 ‐ How to Navigate the User Interface
Function
Provides management of all aspects of working with print jobs. It also
controls some features of the printer.
Displays Automatic and Manual Maintenance tasks you must perform
and indicates when to do them. After you perform each task, the printer
will record that and then calculate when the task must be performed
again. At that time you will be reminded that the particular mainte-
nance task is due.
4
Océ Arizona 6100 Series