Oce Arizona 200 GT User Manual page 123

Activate the zone (or zones) you wish to use either with the icon on the command bar of
3.
the Print Job module or with the matched foot switch (1 or 2) on the floor.
Start the print job either with the Start icon on the command bar or with the Start button
4.
located near the vacuum gauges.
De-activate the zone with either the icon or the foot switch once the image is printed.
5.
Remove the media.
6.
How to Use the Océ Arizona 350 XT Vacuum System
Chapter 6 - How to Operate the Océ Arizona 350 XT 123