Oce Arizona 200 GT User Manual page 57

Component
8) Emergency Stops
9) Maintenance Sta-
tion
10) Coolant Reser-
voir
11) Ink Filters and
Ink Bay
12) Control Station
Panel
(13) UV Lamps
Function
If a situation requires an immediate shutdown of all printer
activity, press one of the three Emergency Stop buttons. To
recover from an emergency shutdown, resolve the problem
that prompted the shutdown and then release the Emergency
Stop by twisting it slightly clockwise. Restoring functionality
to all disabled systems can only occur through an operator
command at the Control Station. See below for the parts of
the hardware interface affected by an Emergency Stop.
Daily printhead maintenance consists of an ink purge and
suction cleaning of the printheads. The maintenance station
cover is slid open to access the printheads and the suction
nozzle. The maintenance station is located under the carriage.
Maintenance is performed when the carriage is parked at the
end of the gantry.
The coolant reservoir is mounted at the service access end of
the gantry. The operator has the ability to refill the reservoir
and to monitor the level of coolant at this location. See
Maintenance section for instructions.
The ink filters ensure that ink flows easily and is free of partic-
ulate matter. These filters must be changed periodically to
ensure that they are working efficiently. See the Maintenance
section, How to Change Ink Filters for a schedule and instruc-
tions.
The Ink Bay contains 2 liter bags of each color (CMYK) of
ink. The ink bay is located under the table in the corner where
media is loaded. ID tags ensure the correct ink color is installed
in the correct location and that expired ink is not installed. A
warning is issued to the operator when a specific ink bag is
empty and needs to be replaced.
This panel contains all of the receptacles for connections from
the printer to the Operator Control Station. This includes
power and video for the LCD display, an Ethernet network
cable plug for communication and data transfer from the host
computer, a cable to the Emergency stop and a USB cable for
the mouse on the Control Station.
Two UV lamp are housed in cartridges to cure the ink. UV
amps have a finite life and must be changed periodically.
Chapter 4 - How to Navigate the User Interface
Operator Interface Hardware
57