Oce Arizona 200 GT User Manual page 58

Operator Interface Hardware
Component
(14) Carriage Guard
(15) Vacuum Shut-
off Valves
(16) Waste Tray
Status of Beacon Light States
The status light indicates the following printer status to the operator.
Status Light
Beacon Status Light
Green Off
Green On
Emergency Stop Effects
Note:
There are three Emergency Stop buttons, one on the control station podium and one
on each end of the gantry. The AC power On/Off switch can also function as an emer-
gency stop. There are more details on the Emergency stops in the Interlock section
terlock Safety System' on page
Activating an Emergency Stop will disable the following:
Carriage motion
Gantry motion
UV curing lamps
Ink pumps
58 Chapter 4 - How to Navigate the User Interface
Function
The Carriage Guard protects the Operator from exposure to
UV light and it also protects the lamps and the carriage by
stopping all motion if it encounters an obstacle in the path of
the carriage.
On top of the carriage are vacuum shut-off valves can be shut
off to avoid ink drips when the printer is turned off. They also
allow longer purges to select printheads (those not shut off).
The waste ink tray is located below the printhead maintenance
station. A manual valve allows the operator to drain the waste
ink to a portable container for disposal .
#
Definition
Printer interlock system or
the emergency stop but-
tons have been triggered.
No motion can be initiat-
ed.
Printer is functional and
ready to initiate motion.
34.
Possible Conditions
Maintenance station door
has been opened or one
the emergency stop but-
tons has been triggered.
'In-