Oce Arizona 200 GT User Manual page 179

To define a white flood layer, modify the printer settings of a processed job in RIP Queue
- right click the job, edit printer settings, select Quality-Layered for the Printer Print
mode, then select Define Layers
If you want to print first surface (e.g. opaque media) the bottom and middle layers can
be configured to be white flood layers and the top layer to be a CMYK data layer. If you
want to print second surface (e.g. transparent media viewed from side that does not have
ink on it), then the bottom layer should be a CMYK data layer and the middle and top
layers white flood layers.
Put the printer back online in ONYX RIP-Queue and send the job to the printer.
5.
Note:
To preview the layer order in the image, click Layers in the printer software.
Print the job.
6.
Chapter 9 - How to Work With White Ink
QuickStart
179