Product Compliance - Oce Arizona 200 GT User Manual

Product Compliance

Introduction
This section provides the EMC FCC compliance information and points to the DGS
web site for access to the official documents for all agency compliance standards that the
Océ Arizona 200/250/300/350 GT and Océ Arizona 350 XT conform to. It also provides
printer manufacturing and contact information and a list of any toxic or hazardous mate-
rial in the printer.
Electromagnetic Compliance (EMC)
FCC Statement for Class A Device:
This equipment generates, uses and radiates radio frequency energy and if not installed
and used as designed or intended, may cause interference to radio communications. This
equipment has been tested and found to comply with the limits for a Class A computing
device. This equipment has been designed to provide reasonable protection against such
interference when operated in residential and commercial environments. Operation of
this equipment in a residential area may cause interference, in which case the user, at his
own expense, is required to take whatever measures are required to correct the interference.
FCC Notice: This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1) This device may not cause harmful interference, and
2) This device must accept any interference received, including interference that may
cause undesired operation.
Any change or modification not expressly approved by the manufacturer
could void the user's authority to operate the equipment.
This device contains an intentional radiator (RFID)
Radio Certificate Number: IC:6497A-3010105668
FCC Identifier: U2P-3010105668
Product Safety
The CE Declaration documents are provided here for your convenience. These documents
and all other applicable compliance certificates are available for download from the Arizona
Customer Support section of our web site: see http://www.dgs.oce.com/PrinterSup-
port/PrinterSupportUser_index.htm.
Product Compliance
Chapter 1 - Introduction 11