DigiDesign D-Control Manual page 69

Removing Plug-in Assignments
You can use the Set to Default switch to quickly remove
plug-in assignments from tracks, without having to go into
Assign mode.
This method removes the assignments immediately,
and cannot be canceled.
To quickly remove plug-in assignments:
Press the Set to Default switch.
1
Press the encoder Select switch for each plug-in assignment
2
you want to remove.
Press the flashing Set to Default switch.
3
Assigning MIDI Inputs and Outputs on Instrument
Tracks
The Assign Inputs and Assign Outputs switches can be used to
assign the MIDI Inputs and Outputs on Instrument tracks.
To assign a MIDI Input or Output on an Instrument track:
Press the Assign Inputs or Assign Outputs switch to enter the
1
corresponding Assign mode. Encoder row #5 shows MIDI in-
puts/outputs.
On each channel where you want to make an assignment,
2
turn the encoder knob in encoder row #5 to select from the
first level of MIDI menu choices.
Press the encoder's Select switch to move down and the By-
3
pass/Mute/Pre switch to move up through MIDI menu levels.
Do one of the following:
4
• Press the flashing encoder Select switch or press the flash-
ing Assign switch to confirm the assignments.
– or –
• Press the flashing Escape switch to cancel the assign-
ments.
Switch Information Controls
The Switch Information controls are used to change the mode
and display of encoder Bypass/Mute/Pre switches, and glo-
bally show encoder parameter values.
Switch Mode switch
Mute Mode
indicator
Switch Info
switch
Switch Information controls
Switch Mode Switch
The Switch Mode switch toggles the function of encoder By-
pass/Mute/Pre switches between Mute and Pre-Fader func-
tions when displaying sends on the encoders.
• When the Switch Mode is set to Bypass, the encoder B/M/P
switch mutes the corresponding send.
• When the Switch Mode is set to Pre, the encoder B/M/P
switch toggles the corresponding send between pre- or
post-fader operation.
To set the Switch Mode:
Press the Switch mode switch repeatedly until the appropri-
ate indicator lights (Mute or Pre).
Switch Info Switch
The Switch Info switch can follow toggling or momentary be-
havior. If pressed briefly, it toggles the encoder display to
show the function assigned to the Bypass/Mute/Pre switch on
each rotary encoder. If held, the function is shown until the
switch is released.
Show Values Switch
The Show Values switch can follow toggling or momentary
behavior. If pressed briefly, it toggles encoder display between
parameter name and parameter value. If held, parameter value
is shown until the switch is released.
Pre-Fader Mode
indicator
Show Values
switch
Chapter 6: Channel Strip Controls 61