DigiDesign D-Control Manual page 49

Display of Slave Track Controls in VCA Master Track
Encoders
If you don't want to view or adjust slave track controls from
the VCA Master channel strip, you can turn off the display of
slave track controls in the encoders of VCA Master tracks.
To toggle display of slave track controls in VCA Masters:
In the Soft Keys section, press the Operation switch repeat-
1
edly to display the page that includes the Encoder VCA dis-
play preference ("EncVCA").
Press the Soft Key that corresponds to "EncVCA" to toggle
2
the setting between "Yes" (display of slave track controls in
encoders) and "No" (no display of slave track controls).
Hold Control (Windows) or Command (Mac) and press the
3
Operations switch to exit.
Display of Insert and Send Positions in Encoders
The Show Send/Insert Letters preference lets you display Send
and Insert letters on send and insert positions with no assign-
ment.
Encoder and channel strip displays show Insert and Send in-
formation as follows:
With the Show/Send Insert Letters preference enabled, in-
serts with no assignments show only uppercase letters (A–J) in
the corresponding positions.
With the Show/Send Insert Letters preference enabled,
sends with no assignments show only lowercase letters (a–j) in
the corresponding positions.
Inserts and Sends with assignments show only the Insert or
Send name and no letters.
To enable display of Insert and Send letters:
In the Console Prefs Soft Keys section, press the Operation
1
switch repeatedly to display the page that includes Show
Send/Insert Letters ("Lettrs").
Press the Soft Key that corresponds to "Lettrs" to toggle the
2
setting between "On" and "Off."
Hold Control (Windows) or Command (Mac) and press the
3
Operations switch to exit.
Rotary Encoder Velocity Mode
The Rotary Encoder Velocity mode affects responsiveness of
rotary encoder knobs. Fixed mode is at normal resolution. In
Velocity Sensitive mode, acceleration can be set to slow, me-
dium or fast. In Fine mode, response is fixed at fine resolution.
To set the Rotary Encoder Velocity mode:
In the Soft Keys section, press the Operation switch repeat-
1
edly to display the page that includes the Rotary Encoder Ve-
locity Mode preference ("Rotary").
Press the Soft Key that corresponds to "Rotary" to choose be-
2
tween the "Fixed," "Vel-Sl" (velocity-sensitive slow) "Vel-Md"
(velocity-sensitive medium) "Vel-Fa" (velocity-sensitive fast)
and "Fine" settings.
Hold Control (Windows) or Command (Mac) and press the
3
Operation switch to exit.
Pan on Lower Encoder
The Pan on Lower Encoder preference determines whether
Pan controls are displayed on the bottom encoder of each
channel, even when another type of control is displayed on
the upper encoders.
To set the Pan on Lower Encoder preference:
In the Soft Keys section, press the Operation switch repeat-
1
edly to display the page that includes the Pan on Lower En-
coder preference ("PanBot").
Press the Soft Key that corresponds to "PanBot" to toggle the
2
setting between "Yes" and "No."
Hold Control (Windows) or Command (Mac) and press the
3
Operation switch to exit.
Encoder Order
The Encoder Order preference determines whether inserts,
sends, and pan controls will be displayed in order from
top-to-bottom or bottom-to-top on D-Control rotary encod-
ers.
To set the Encoder Order preference:
In the Soft Keys section, press the Operation switch repeat-
1
edly to display the page that includes the Encoder Order pref-
erence ("Encod").
Press the Soft Key that corresponds to "Encod" to toggle the
2
setting between "Bot-Tp" (bottom-to-top ordering) and
"Tp-Bot" (top-to-bottom ordering).
Hold Control (Windows) or Command (Mac) and press the
3
Operation switch to exit.
Chapter 5: Configuring D-Control 41