DigiDesign D-Control Manual page 98

Safe Switch
The Safe switch toggles the Safe button in the plug-in window,
which protects existing automation for that plug-in from be-
ing overwritten.
Cycle Switch
The Cycle switch steps through all available EQ plug-ins on
the focused channel.
Bypass Switch
The Bypass switch bypasses the plug-in.
Window Switch
The Window switch is used to open and close the on-screen
window for the currently focused plug-in.
90 D-Control Guide
EQ Level Controls and Meters
Clip indicator
Input meter
Level controls and meters in the EQ section
Input and Output Gain Encoders
The Input and Output Gain encoders control the input gain
and output gain for the current plug-in. The Auto indicator
under each encoder knob lights when the parameter is en-
abled for automation.
Input and Output Meters and Clip Indicator
The Input and Output meters show the input and output lev-
els for the current plug-in. The Clip indicator lights when a
clip is reported by the plug-in, and can be cleared by pressing
the Clear Clip switch in the Session Management section.
Input Gain encoder
Output Gain encoder
Output meter