DigiDesign Venue D-show Quick Start Manual

S S
OFTWARE CREENS
Inputs
Use the View Mode switches (C)
or the Trackball (H) to display the View, adjust, name,
different software screens and configure
inputs
Outputs Filing
View, adjust, name, Transfer, save,
and configure and load data
outputs
Snapshots Patchbay
Store, recall, Manage hardware
and edit snapshots I/O routing and
channel assignment
Plug-ins Options
Assign, route, and Configure the
configure plug-ins system, install plug-
ins, and customize
preferences
© 1/05. Digidesign, Digidesign Development Partners, Digi 002,
Customer Support USA | 1.650.731.6100 or 1.888.456.3444
Digi 002 Rack, DigiLink, D-Show, Ethernet Expansion, FOH IOx,
FWx, FOH Rack, HD Core, Mbox, Personal Q Controller, PQ Link,
www.digidesign.com UK | 44.(0).1753.653.322
PQ Rack, PRE, Pro Tools, Pro Tools|HD,Pro Tools|HD Accel,
Snake, SRI, SRO, Stage Rack, and TDM Record are trademarks or
Japan | 81.3.3505.3417
registered trademarks of Avid Technology, Inc., or its subsidiaries
or divisions. All other trademarks contained herein are the prop-
erty of their respective owners. All features and specifications
subject to change without notice.
9328-11985-00 Rev.A
I F
B NPUT ADERS
Shortcuts &
Global Modifiers
Multi-Select Make Stereo FX Returns
To select multiple channels To make two mono channels into To bank the Main faders to FX
1. Press and hold Multi-Select one stereo channel return channels
(it flashes when enabled) 1. Enable Config mode • Press FX 1–8 or FX 9–16
2. Press Select on each channel 2. Press Make Stereo
Graphic EQ
to include 3. Press Select on two mono channels
To adjust graphic EQ using the
3. Adjust parameters on any selected 4. Press Make Stereo again to confirm
Main faders
channel*
To split a stereo channel into two
1. Select an output that has a GEQ
4. Press Cancel, or press Select on
mono channels
assigned
an unselected channel to exit
1. Enable Config mode
2. Press a GEQ switch to control
* Multi-Select does not apply to
2. Press Make Stereo
that bank of frequencies
Input Gain and Pad
3. Press Select on a stereo channel
Keyboard Shortcuts
4. Press Make Stereo again to confirm
Default
To select a particular channel or
To reset a fader, knob, or switch Fader Banks A, B, C, D
snapshot using its number or name
parameter
To bank Main and Sidecars to other
• Type the number or first few
1. Hold Default
input channels
characters of the channel name
2. Press Select to reset a fader;
• Press Bank A, B, C, or D, as needed
(Inputs or Outputs screen) or
press the knob or switch you
snapshot name (Snapshots screen)
want to reset
Fine
To adjust a parameter with fine
resolution
Assigning a Graphic EQ
Hold Fine while adjusting
• (Outputs screen)
the parameter
• Double-press the Fine button to
latch Fine mode
A O F
E SSIGNABLE UTPUT ADERS
Show VCA Members
Aux 1–8/9–16, Personal Qs,
To identify channels assigned to
Matrixes, Groups, VCAs
each VCA
To bank output faders
1. Press Show VCA Members
Press an Output Faders switch
•
2. Check the Bus Assign LEDs
VCAs in each channel; a flashing LED
To assign channels to a VCA
indicates membership
1. Press VCAs in the Output Faders
section
2. Press Multi Assign on the VCA to
which you want to assign channels
3. Press Select on each channel to
include in the VCA
4. Press Multi Assign on the VCA
again to confirm
M /G S
F
ASTER LOBAL ECTION
Monitoring Talkback/ Osc
To align the monitor bus to the main PA To route to outputs
1. Press and hold the Delay switch 1. Press Talkback, 2-Track or Oscillator
2. Rotate the Select encoder in the ACS 2. Press Route to Selected
Options & Snapshots section (C) 3. Press Select on output channels
4. Press Route to Selected again
Mute Groups
to confirm
To assign channels to a Mute Group
5. Press On/Talk to activate; rotate
1. Press Assign
encoder to adjust level
2. Press a Mute Group switch (1–8)
3. Press Select on each channel to Solo/ PFL
include in the Mute Group To engage Solo In Place
4. Press Assign again to confirm • Press and hold Solo In Place
for two seconds
Mains controls
DIGIDESIGN VENUE
L I V E S O U N D E N V I RO N M E N T
Quick Star t Guide