Bank/Nudge Section; Bank Select Matrix - DigiDesign D-Control Manual

Bank/Nudge Section

The Bank/Nudge section controls the display of any channels
in Normal mode on the D-Control surface. They are also used
to nudge the display of the Focus Channel Strip forward or
backward in 1-channel or 8-channel increments.
If any channels are in any of the Custom Fader modes, they
are not affected by Bank or Nudge commands, and the other
channels move around them.
D-Control Bank/Nudge Section
Nudge 1 Switches
The Nudge 1 switches move the display of tracks on the con-
trol surface to the left or right, one channel at a time.
To nudge the track focus forward or backward by one channel:
With a track focused in the Focus Channel Strip, hold Con-
trol (Windows) or Command (Mac) and press the left or right
Nudge 1 switch in the Bank/Nudge section.
Nudge 8 Switches
The Nudge 8 switches move the display of tracks on the con-
trols surface to the left or right in eight-channel increments.
To nudge the track focus forward or backward by eight channels:
With a track focused in the Focus Channel Strip, hold Con-
trol (Windows) or Command (Mac) and press the left or right
Nudge 8 switch in the Bank/Nudge section.
Bank Switches
The Bank switches move the display of tracks on the control
surface to the left or right by the number of available channels
on the control surface.
Home Switch
The Home switch moves the display of tracks so that the first
track in the session is shown on the leftmost channel of the
control surface.
98 D-Control Guide
Nudge by 1 Track Left and Right
switches
Nudge by 8 Tracks Left and Right
switches
Bank Left and Right switches
Home switch

Bank Select Matrix

The Bank Select matrix is used in Custom Fader modes to cre-
ate and select Custom Groups and Mix/Edit Groups, to select
Track Types for display in the Custom Faders, and to select
Custom Fader Plug-in parameter pages.
See Chapter 13, "Custom Fader Modes" for complete informa-
tion on the use of Bank Select matrix in Custom Fader modes
D-Control Bank Select Section
Bank Select Edit Switch
The Bank Select Edit switch is used when creating Mix/Edit
Groups or Custom Groups from D-Control. After you press
this switch, you can then select the tracks you want to add to
the group.
You can also create new Mix/Edit Groups by selecting the
tracks you want in the group and double-pressing the Bank Se-
lect Edit switch.
Bank Select Switches
The Bank Select switches are used when assigning or recalling
Custom Groups or Mix/Edit Groups, and selecting Track
Types or plug-in parameter pages from D-Control.
Bank Select Edit switch
Bank Select switches 1–12