Viewing Assignments - DigiDesign D-Control Manual

Viewing Assignments

Display of I/O Assignments
You can view the I/O assignments for individual channels in a
momentary I/O view. I/O assignments are displayed at the of
bottom the channel's encoders, according to track type. As-
signments are displayed from top to bottom as follows:
• Audio and Auxiliary Input tracks
• Input
• Output
• Instrument tracks
• MIDI input
• MIDI output
• Aux input
• Aux output
• MIDI tracks
• MIDI input
• MIDI output
• Master Fader tracks
• Output
• VCA Master tracks
• Group assignment
To view the I/O assignments on a track:
Press and hold the Sends switch on the track. The Sends
switch lights to indicate I/O view.
Display of Multiple Output Assignments
Audio and MIDI Tracks
For audio or MIDI tracks that have multiple output assign-
ments, a Plus (+) sign precedes the output name.
To view the names of multiple output assignments:
Press and hold the Sends switch on a track with multiple
1
output assignments. The Sends switch lights to indicate I/O
view.
Press the B/M/P switch under any output name preceded by
2
a plus (+) sign. The names of output paths "spill" onto the
track's encoder displays.
To exit output "spill" view, press any of the lit output path
3
B/M/P switches.
To rename an I/O path on an audio track:
Press and hold the Sends switch on the track. The Sends
1
switch lights to indicate display of I/O assignments.
If you have multiple I/O assignments on the track, press the
2
B/M/P switch under any output name preceded by a plus (+)
sign. The names of output paths "spill" onto the track's en-
coder displays.
Hold Start (Windows) or Control (Mac) and press the B/M/P
3
switch under the I/O path you want to rename.
Enter a new name for the path.
4
Click OK.
5
Display of Multiple Send Assignments
For sends that have multiple assignments, a Plus (+) sign pre-
cedes the send name.
To view the names of multiple send assignments:
Press the Sends switch on a track with multiple send assign-
1
ments.
Hold Control (Windows) or Command (Mac) and press the
2
B/M/P switch under any Send name preceded by a plus (+)
sign. The names of send paths "spill" onto the track's encoder
displays.
To exit send "spill" view, press any of the lit send path B/M/P
3
switches.
To rename a Send path:
Press the Sends switch on the track with the Send you want
1
to rename.
If you have multiple sends on the track, hold Control (Win-
2
dows) or Command (Mac) and press the B/M/P switch under
any Send name preceded by a plus (+) sign,. The names of send
paths "spill" onto the track's encoder displays.
Hold Start (Windows) or Control (Mac) and press the B/M/P
3
switch under the send path name.
Enter a new name for the path.
4
Click OK.
5
Chapter 11: Normal Mode Operations and Commands 129