DigiDesign D-Control Manual page 50

Select Switch Latch Mode
The Select Switch Latch mode determines whether channel
Select switches follow latching or exclusive-or (non-latching)
behavior when in Select mode.
To set the Select switch mode:
In the Soft Keys section, press the Operation switch repeat-
1
edly to display the page that includes the Select Switch Latch
mode preference ("Select").
Press the Soft Key that corresponds to "Select" to toggle the
2
setting between the "Latch" and "ExclOr" (unlatched) set-
tings.
Hold Control (Windows) or Command (Mac) and press the
3
Operation switch to exit.
Custom Fader Preferences
The following settings and preferences affect display of Cus-
tom Faders on D-Control. For more information on using Cus-
tom Faders, see Chapter 13, "Custom Fader Modes."
Maximum Custom Fader Bank Size
The Maximum Custom Fader Bank Size preference determines
the number of channels to be used when displaying tracks in
the Left or Right Custom Fader bank.
Custom Fader Bank Size is set independently for each category
of Custom Fader modes (Plug-Ins, Groups, and Track Types).
Options for bank size include 4, 8, 16, or 32 channels, up to
the total number of channels on the D-Control system. You
can choose settings for each of these sizes (indicated by the
prefix "Min") that use the minimum number of channels nec-
essary, so that the Custom Fader section dynamically resizes
to match the number of channels in the group.
LCFPI (Left CF Bank Size for Plug-ins) Determines the number
of channels allocated for Custom Fader Plug-in mode in the
Left Custom Fader section.
RCFPI (Right CF Bank Size for Plug-ins) Determines the num-
ber of channels allocated for Custom Fader Plug-in mode in
the Right Custom Fader section.
LCFGrp (Left CF Bank Size for Custom Groups and Mix/Edit
Groups) Determines the number of channels allocated for Cus-
tom Groups mode in the Left Custom Fader section.
RCFGrp (Right CF Bank Size for Custom Groups and Mix/Edit
Groups) Determines the number of channels allocated for Cus-
tom Groups in the Right Custom Fader section.
LCFTyp (Left CF Bank Size for Track Type) Determines the
number of channels allocated for Custom Fader Tracks mode
in the Left Custom Fader section.
42 D-Control Guide
RCFTyp (Right CF Bank Size for Track Type) Determines the
number of channels allocated for Custom Fader Tracks mode
in the Right Custom Fader section.
To set the maximum Custom Fader bank size:
In the Soft Keys section, press the Operation switch repeat-
1
edly to display the page that includes the Custom Fader Bank
Size preferences.
Do one of the following:
2
• To increment the number of channel strips, press the Soft
Key that corresponds to the preference setting you want
to change.
– or –
• To decrement the number of channel strips, hold Shift
and press the Soft Key that corresponds to the preference
setting you want to change.
Hold Control (Windows) or Command (Mac) and press the
3
Operation switch to exit.
Custom Fader Bank Justification
The Custom Fader Bank Justification preference determines
the distribution of the two available Custom Fader banks on
the control surface.
LCFJst (Left Custom Fader Justification) Determines whether
the Custom Faders controlled by the left Custom Faders sec-
tion are placed at the left, left center, right center, or right of
the Main Unit.
RCFJst (Right Custom Fader Justification) Determines whether
the Custom Faders controlled by the right Custom Faders sec-
tion are placed at the left, left center, right center, or right of
the Main Unit.
To set Custom Fader bank justification:
In the Soft Keys section, press the Operation switch repeat-
1
edly to display the page that includes the Custom Fader Bank
Justification preferences ("LCFJst" or "RCFJst"):
Repeatedly press the Soft key that corresponds to "LCFJst"
2
or "RCFJst" to choose between the "Left," "CenterL," "Cen-
terR," and "Right" settings for the corresponding bank of Cus-
tom Faders.
Hold Control (Windows) or Command (Mac) and press the
3
Operation switch to exit.