Window Configurations - DigiDesign D-Control Manual

Window Configurations

You can view, create, and edit Window Configurations from
the D-Control Soft Keys.
To display Window Configurations in the Soft Keys:
Hold the Start key (Windows) or Control key (Mac) and
1
press the Mem Loc switch in the Select/MIDI Soft Keys section.
The Mem Loc switch flashes to indicate Window Configura-
tion display.
If there are more than six Window Configurations, press the
2
Soft Keys that correspond to Page Up and Page Down to view
additional configurations.
To recall a Window Configuration from the Soft Keys:
Hold the Start key (Windows) or Control key (Mac) and
1
press the Mem Loc switch in the Select/MIDI Soft Keys section.
Press the Soft Key that corresponds to the Window Config-
2
uration you want to recall.
To create a Window Configuration from the Soft Keys:
Hold the Start key (Windows) or Control key (Mac) and
1
press the Mem Loc switch in the Select/MIDI Soft Keys section.
Press any Soft Key that corresponds to a blank display.
2
Set the properties of the new Window Configuration in the
3
New Window Configuration dialog.
Press the Soft Key that corresponds to Enter to save the Win-
4
dow Configuration.
To edit a Window Configuration from the Soft Keys:
Hold the Start key (Windows) or Control key (Mac) and
1
press the Mem Loc switch in the Select/MIDI Soft Keys section.
Hold the Start key (Windows) or Control key (Mac) and
2
press the Soft Key that corresponds to the Window Configura-
tion you want to edit.
Change the properties of the Window Configuration in the
3
Edit Window Configuration dialog.
Press the Soft Key that corresponds to Enter to save the Win-
4
dow Configuration.
To delete a Window Configuration from the Soft Keys:
Hold the Start key (Windows) or Control key (Mac) and
1
press the Mem Loc switch in the Select/MIDI Soft Keys section.
Hold the Alt key (Windows) or Option key (Mac) and press
2
the Soft Key that corresponds to the Window Configuration
you want to delete.
114 D-Control Guide